Our new showroom is now open!        Come and visit us Monday to Saturday 09:30 - 17:00
 

Browse
Shop By Manufacturer
new showroom
now open!
Visit us
Monday to Saturday
09:30 - 17:00
GATE Electronics TITAN MOSFET Drop-In Module for GBV3 with Basic Firmware © Copyright Zero One Airsoft

£84.99
In stock for next day delivery
Also on display in our showroom
SKU: TTN3-B
pID: 4939
Not yet reviewed.
Be the first!
Write a review here
The TITAN from GATE Electronics is the most advanced MOSFET available. When used in conjunction with GATE's Tactical Programming Card or USB-Link/Control Station firmware (not included with this product) this revolutionary upgrade has a host of fantastic features that allows true customisation of your AEG. Check out the description for the advanced TITAN sets to learn about how a TITAN drop-in MOSFET will transform your AEG into an advanced training weapon system.

This TITAN drop-in module is an excellent option if you already own the complete set and want to upgrade a second AEG. Simply use the components you already have to program additional drop-in modules.

*Please note... The TITAN for GBV3 can be used with both rear and front wired guns. For a rear wired gun simply purchase the GATE Electronics Extension Cable for Rear Wiring TITAN GBV3.

*Please note...To run and set up the TITAN for GBV3, it is necessary to first have the USB-Link to configure the TITAN using the Control Station firmware.

Key Features:

Precise Sensitivity Adjustment
Configurable Fire Selector
Cycle Detection
Pre-Cocking
Burst Mode
ROF Control
ROF STAB
Sniper Delay
Smart Trigger
AUG Mode
Battery Detection
Low Battery Warning
Smart Fuse
30rds Mag Mode
Adaptive Active Braking
Built-In Self Test
Military Specification Coating
14.8v Li-Po Ready

*Some of the above features are only available once upgraded to advanced firmware via the Control Station. For a full comparison of features please see the pictured firmware editions chart.

Order today and you could receive this item on Tuesday.
GATE Electronics TITAN MOSFET Drop-In Module for GBV3 with Basic Firmware Features...

  • Complete Trigger Switch Replacement
  • Optical Sensors - Innovative optical sensors instead of mechanical switches that can be prone to faults.
  • Increase Gearbox Efficiency - Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should.
  • It is protected against short-circuits, overheating and overloading.
  • Protects the battery against over-discharge.
  • It significantly improves battery life, trigger response, rate of fire, spring life and gearbox reliability (when pre-cocking is off).
  • It is compatible with even the strongest AEG replicas and batteries.
  • Updateable & Upgradeable Firmware
  • Can replicate trigger response like in the real thing!
  • The innovative proximity trigger sensor, in conjunction with the advanced firmware, offers a whopping 250 possible sensitivity settings.
  • Replaces the need for a cut-off lever.
  • It is compatible with most V3 gearboxes (including CNC) on the market without any modification.
  • Run-away motor 30 round limit mode.
  • Comprehensive but simple to use programming at home or in the field, when using the USB Link or Tactical Programming card (not included).
What's in the box...
  • TITAN Drop-In Module with Basic Firmware
  • Installation Kit
  • Quickstart Guide
Any technical or performance figures listed are based on a spot test we performed at a given point in time. These may vary WILDLY because of random alterations made by the manufacturer from batch to batch, gas pressure, ambient temperature, battery charge and so on. Some of the figures therefore should be treated as a very loose guide or indication only, based on the spot tests we have performed. The images and product contents listed are again based on a spot check we performed at a given point in time, and may differ due to changes, omissions or inclusions made by the manufacturer. If you require something specific, such as FPS, you MUST specify this at time of ordering, and take a tuning option where required.

Any images and/or product contents listed are based on a spot check we performed at a given point in time, and may differ due to changes, omissions or inclusions made by the manufacturer without notice.

GATE Electronics USB Link for GATE Control Station
GATE Electronics USB Link for GATE Control Station
£28.99
GATE Electronics Programming Card for TITAN MOSFET
GATE Electronics Programming Card for TITAN MOSFET
£28.99
GATE Electronics TITAN MOSFET Full Set for GBV3 with Advanced Firmware
GATE Electronics TITAN MOSFET Full Set for GBV3 with Advanced Firmware
£140.99
Zero One 88g Threaded CO2 Capsule
Zero One 88g Threaded CO2 Capsule
£9.99


Protective ModuleGATEElectronicsTITANMOSFETDrop-InModuleGBV3BasicFirmware
Xmas Opening
M T W T F S S
16 17 18 19 20 21
SR
22
23 24 25 26 27 28
SR
29
30 31 1 2 3 4
SR
5
Account Sign In
or Sign In Below
Email Address

Password

My Basket

Your basket
is currently
empty :(


 
Help Topics
New Stock
CYMA AEP Magazine for CM121 Desert Eagle
CYMA AEP Magazine for CM121 Desert Eagle
In Stock Now!
£6.95
Checkout all our latest products here
Most Popular
G&G ETU 2.0 & MOSFET 3.0 for Rear Wired Version 2 Gearbox
G&G ETU 2.0 & MOSFET 3.0 for Rear Wired Version 2 Gearbox
£39.99
GATE Electronics PicoSSR 3 MOSFET
GATE Electronics PicoSSR 3 MOSFET
£12.99
 
The system time now is 6:12:44.

Powered by Zero One In-House osC Engine Software Version 2.1.9
Copyright © Zero One Airsoft Ltd. All rights reserved.